Chapter 3. Configuring Cisco UCS Using UCS Manager
In this chapter, we will provide an introduction to Unified Computing System Manager (UCSM) and discuss Graphical User Interface (GUI) as well as the options that are available in tabs and nodes under the two main screen panes that are used for the configuration and management of UCS hardware and software components. We will look at some global configuration policies that provide information on DNS, Simple Network Management Protocol (SNMP), and power redundancy. We will then look at the basic steps to set up the initial configuration. In subsequent chapters, we will delve deep into individual topics such as policies, identity/resource pools, templates, and service profiles for configuring servers.
We will then discuss Command Line Interface (CLI), which provides the same UCS component configuration as that of GUI. All UCS configurations are possible from both GUI and CLI.
In subsequent chapters, we will extensively use the UCSM GUI mainly for the configuration of various UCS components and policies.
The topics that will be covered in this chapter are as follows:
- Introduction to Cisco UCSM
- Walking through the UCSM interface
- Starting with the initial configuration
- Initial configuration step-by-step
- Global configuration policies
- UCS Manager – Command Line Interface